How is PCBA packaged for shipment?

In fact, the packaging and shipment of PCBAs is very particular, because the bumpy journey may cause the circuit board to suffer some unnecessary wear. In order to avoid this unnecessary wear, technicians will also pack and ship PCBA in accordance with certain transport packaging requirements. Let’s take a look together.

Following trays or vehicles can be used for PCBA packaging.

1. Anti-static PE foam trays

2. Permanent anti-static black injection molding trays

3. Anti-static blister box trays

4. 3G turnover vehicles

Following bags or boxs can be used for PCBA shipment

1. PCBA anti-static foam bags 

2. Anti-static turnover boxes according to different quantities and specifications

There are some requirements for PCBA packaging and shipping.

1. Anti-static packaging materials

PCBA boards are agile and easy to be damaged, and static electricity will break through the chip in PCBA boards, since static electricity cannot be seen or touched, but easy to be generated. So, in the process of packaging and transportation, anti-static bubble bags, shielding bags, anti-static PE bags and vacuum bags and other ways shall be used to package PCBA boards carefully.

2. Moisture-proof and vibration-proof packaging

No more than two layers are superimposed upward in an anti-static packaging box, and the anti-static partition needs to be placed between the two layers to maintain stability and prevent shaking.